Tool Post Lathe

MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)

MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)
MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)
MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)
MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)
MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)
MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)
MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)
MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)

MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)

2-Axis CNC Lathe / Turning Controller with TECO AC Servos (MANUAL TOOL POST TYPE MACHINE). Easy to install and operate (very short learning curve to get started). Large 17 display shows your virtual tool path in real-time (optional touch screen).

Virtually unlimited part memory space. Fanuc Style G-Code (Easy to Program with Cad/Cam Software). Rugged steel CNC interface - liquid & dust resistant. This kit is configured for a flatbed tool room lathe up to 20 swing, with a manual tool post (MTP) or gang tooling. Configurable for any size flat / slant bed engine lathe.

Image of MachMotion control software screen. 1150T Series CNC Lathe/Turning Control Retrofit Kit with TECO AC Brushless Servos. CNC kit can be easily customized for any size machine tool. Adaptable to many manufacturing machine types. The 1150T series 2 axis Lathe/Turning retrofit package includes: a CNC with large 17 display (optional touch screen), Control mounting arm, 2 TECO AC brushless servo motors, Spindle Encoder. Rugged steel control interface that is liquid and dust resistant. Well placed operator panel includes Jog and Cycle-Start/Stop buttons, E-Stop and Feed Rate Override, Spindle Override, Rapid Override knobs. Pull out/hide away keyboard to protect it from hot chips or coolant. Solid-state hard drive vibration & shock protected. 1150T Series controls are built on a powerful and flexible platform and has been designed to be the easiest to learn CNC available. Its easy to use Window style interface utilizes a clear one page screen format without compromising functionality. This Turning Control system uses Fanuc Style G-Code. It is easily programmed using a CAD/CAM software package or longhand programming. Popular G-Codes used by Fanuc. Constant Surface Speed G96 with Automatic Spindle Speed check. As always, MachMotion's superior support is FREE with this product for life.

This package's value per dollar will help you get the maximum return on investment (ROI). Our company's Sales, Service, Support and Manufacturing is 100% US Based. Machinist are pleasantly surprised once they see how easy it is with their new MachMotion control.

Initially, machinists are intimidated once all the new CNC components are in place and it comes time for the control parameters to be set up. Once the Control retrofit kit is mounted and wired properly, you will be able to power on the CNC Control and jog your Axes without any parameter changes. Basic machine specific parameters are all that is remaining to set up. After power up, we can assist you in entering any needed machine specific control parameters (listed below) and then you're ready to make your parts. Encoder counts per inch (Units Per inch).

Axis Acceleration, Max Rapid Speed. Spindle direction, Spindle Speed calibration setup.

Additional Accessories - Coolant, Mist, Lamp, etc. After the specific machine parameters are set up, it's time to make your first part. Simple to backup machine parameters to USB memory stick so you'll never lose them. Remote login support available free! Easy to Learn and Operate. We have produced this retrofit package to be one of the quickest and easiest to learn and operate. Windows-style screen navigation is so straightforward and intuitive that an entry level operator can start making a basic part in less than an hour.

G-Code: MachMotion's controls accept standard Fanuc style G-code programming. You will need a CAD/CAM software program convert your complex DXF shape files into G-code. Most CAD/CAM programs today have compatible post-processors. An affordable and efficient control that helps you make more parts in less time and maximize your ROI.

Time savings and reduced labor costs due to easy installation and operation. Part File Import: Easily transfer files to and from the control using your local network (Ethernet or Wi-Fi) and/or USB. Controls can be run by operators who do not require any expensive or special training. We are an anti-proprietary solution provider which means there are no expensive to maintain/replace proprietary components. Remote "Log Me In" support via the internet which simplifies setup and diagnosis enables our technicians to monitor our control systems in real time anywhere in the world at no extra charge. Backed by our 5 Star Promise. CNC Mill Control Retrofit Kit I/O. X, & Z Limit Switches, Oiler Refill Warning, etc. 1 Clockwise, 1 Counterclockwise (2 Amp). Analog Output 0-10V for Spindle Speed Control.

Large 17" display shows your virtual tool path in "real time (optional touch screen). Easy to use Windows-style screen navigation (NO more multi-keystrokes to access a sub menu). Standard Fanuc Style G-Code programming capability. Use CAD/CAM software to program parts. Built in G-Code editor, color coordinated to specific features.

Digital AC servo system accelerates and decelerates faster than standard analog systems. 126 work/fixture offsets (Included Free). Rugged steel CNC interface, liquid and dust resistant. Pull out/hide away keyboard to protect from hot chips and coolant while cutting parts.

Manual Hand Wheels Capability X and Z Axis. Network access via Ethernet, to offices/other departments.

USB: Easily accessible USB port, used to upload Part files and/or backup your control. If you are thinking about upgrading/retrofitting, or building a new machine, message us today! The item "MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)" is in sale since Monday, February 22, 2016. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\PLCs & HMIs\PLC Processors".

The seller is "salesmachmotion" and is located in Newburg, Missouri. This item can be shipped worldwide.

  • Brand: MachMotion
  • Model: KT-1150T-X4-MTP
  • Country/Region of Manufacture: United States


MachMotion CNC Lathe / Turning Control Kit, Retrofit Kit (manual tool post type)